Certification Answers

What position should the wheel lock buttons be when in a locked state?

  1. Pushed OUT
  2. Pushed IN

Correct Answer:

  • Pushed OUT

I hope this helps! Let me know if you have any other questions.

Certification Questions & Certification Answers

How do you access the diagnostic tool?

  1. By going to Settings>About Jamboard and tapping on “Build Number” 7 times.
  2. By going to Settings and tapping on “About Jamboard” 7 times.
  3. By long pressing the power button on the back of the Jamboard for 7 seconds.
  4. By going to Settings>About Jamboard and tapping on “Board Name” 7 times.

Correct Answer:

  • By going to Settings>About Jamboard and tapping on “Build Number” 7 times.

How is access control on a Jamboard determined?

  1. It follows the same permissions model as Google Drive.
  2. Whoever writes on the Jamboard first.
  3. In the Jamboard management console.
  4. The customer’s network administrator will have to grant each user access

Correct Answer:

  • It follows the same permissions model as Google Drive.

If needed, how do you factory reset a Jamboard?

  1. Power off the device, press the power button for 5 seconds, and use volume rocker to select the factory reset option. Wait 20 min for the factory reset.
  2. With the power on, press the screensaver button 5 times, and use volume rocker to select the factory reset option. Wait 20 min for the factory reset.
  3. Submit a support case to Google providing the serial number and domain of the device.
  4. Go to settings and tap the tools icon (hammer and screwdriver)

Correct Answer:

  • Power off the device, press the power button for 5 seconds, and use volume rocker to select the factory reset option. Wait 20 min for the factory reset.

Select the response that best reflects the wall mounting process:

  1. Use the wall-mount included with the device, mount the device to the wall studs and confirm that the studs can support 92 lbs. of combined weight (board and wall mount), ensure device is placed in close proximity to power and ethernet
  2. Use customer provided 3rd party wall-mount, discard provided mount, mount device using drywall anchors, place the device wherever the customer prefers
  3. Use the wall-mount included with the device, mount device using drywall anchors, ensure device is placed in close proximity to power and ethernet
  4. Use customer provided 3rd party wall-mount, discard provided mount, mount the device to the wall studs, ensure device is placed in close proximity to power and ethernet

Correct Answer:

  • Use the wall-mount included with the device, mount the device to the wall studs and confirm that the studs can support 92 lbs. of combined weight (board and wall mount), ensure device is placed in close proximity to power and ethernet

The longer set of legs will have a locking mechanism on the wheels and face towards the back.

  1. FALSE
  2. TRUE

Correct Answer:

  • FALSE

True or False: The recommended download speed for best Jamboard experience is 4 Mbps per second, it will function at lower speeds but latency may occur.

  1. FALSE
  2. TRUE

Correct Answer:

  • TRUE

What are all the ways to invite collaborators to a Jam?

  1. By email address
  2. By QR code
  3. Via the Jamboard app
  4. By Jam code

Correct Answer:

  • By email address
  • Via the Jamboard app
  • By Jam code

What happens if a customer purchases a Jamboard without the stand, but does purchase the basic installation service?

  1. Source your own third-party stand and mount the Jamboard to it
  2. Be prepared to do mount the Jamboard to a wall, using the wall mount provided in the Jamboard box
  3. Be prepared to do a wall mount installation using a third-party wall mount, while discarding the one that comes in the display box
  4. None of the above

Correct Answer:

  • Be prepared to do mount the Jamboard to a wall, using the wall mount provided in the Jamboard box

What is the best way to tell that the display was hung correctly?

  1. The display will be able to tilt downward and return to it’s original vertical position with ease
  2. The device will be able to pan, tilt, and scope with ease
  3. The display will be able to rotate 90° from landscape to portrait
  4. The display will fall off the mount if jarred

Correct Answer:

  • The display will be able to tilt downward and return to it’s original vertical position with ease

What position should the wheel lock buttons be when in a locked state?

  1. Pushed OUT
  2. Pushed IN

Correct Answer:

  • Pushed OUT

What type of licenses does the customer need to have in order to set up and use Jamboard correctly?

  1. Both a G Suite and Jamboard license
  2. A Jamboard license only
  3. A G Suite license only

Correct Answer:

  • Both a G Suite and Jamboard license

When connecting to the Internet for an initial update, what type of network types are available out of the box?

  1. Only open and unfiltered networks are supported out of the box, additional updates are available after the update
  2. All Enterprise type networks
  3. Linksys
  4. Only wired connections will be available out of the box
  5. Only Wifi connections out of the box

Correct Answer:

  • Only open and unfiltered networks are supported out of the box, additional updates are available after the update

When should a Jamboard be connected through a proxy?

  1. Usage of proxies should generally be avoided, as they add latency.
  2. Whenever possible to improve performance.
  3. To improve SSL inspection speed.
  4. If a wired connection is not available.

Correct Answer:

  • Usage of proxies should generally be avoided, as they add latency.

Which of the following guidelines should be followed when providing a custom Premium White Glove Service offering?

  1. All of the above
  2. Use Jamboard-provided stand, not a third-party stand
  3. Articulating wall mount and wall must be able to support load (92 lbs + VESA compatible adapter/mount)
  4. No horizontally embedded tabletop setups
  5. A battery should never be used in place of the power cord

Correct Answer:

  • All of the above

Which of the following is the only acceptable method for cleaning the display?

  1. Scouring pad
  2. Microfiber cloth
  3. Towel
  4. Chemical cleaners

Correct Answer:

  • Microfiber cloth

Which of the following would you do before leaving the customer site?

  1. All of the above
  2. Ensure that physical installation standards are met
  3. Confirm device is powers on and boots to the whiteboard application properly
  4. Confirm device is provisioned, and customer sees the device JPanel
  5. Ensure the customer sign-off is complete

Correct Answer:

  • All of the above

Who from the customer side will need to be on-site to provision each Jamboard?

  1. The G Suite Groups Admin
  2. The G Suite Super Admin.
  3. Any user
  4. The Jamboard Super User

Correct Answer:

  • The G Suite Super Admin.

This page was last edited on 12th March, 2024 at 9:01 AM (UTC).

  • © 2024 Certification Answers - Text is available under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).
    Additional terms may apply. By using this site, you agree to the Terms of Use and Privacy Policy.